Old Flagstone Floor Repaired and Renovated in Ripley

This property in the lovely Surrey village of Ripley near Woking was over 400 years old and featured an amazingly dirty flagstone floor. The village itself has a long history that dates to Norman times so I wouldn’t surprise me if the stone in this floor was original or potentially older.

The house was a family property with a large garden that the kids and dog used and liked to walk through the house bringing the garden inside! It was fair to say the area was subject to heavy traffic and attracted a fair amount of dirt. I recommended a deep and thorough clean and then the application of a durable sealer to protect the stone going forward.

400 Year Old Flagstone Floor Before Restoration Ripley 400 Year Old Flagstone Floor Before Restoration Ripley

To demonstrate the potential of the flagstones I applied different Tile Doctor cleaning products on a small test area to see which would work best. It wasn’t long before the dirt was lifted out of the pores of the stone and you could really get an ideal of how the stone could be could transformed. They agreed my quote for the work, and we arranged a time to carry out the work which would take two days. I would start the cleaning on a Friday then we would return on the following Tuesday to seal leaving it to dry for more than two days in between.

Cleaning and Restoring a Flagstone Tiled Kitchen Floor

The first job was to clean the grout using a strong dilution Tile Doctor Pro-Clean which turned it from a dark brown to a sandy yellow colour. This work was done by hand with a hard-scrubbing brush and due to the wide joints took three hours to complete before finally rinsing and extracting the dirt off the floor with a wet vacuum.

400 Year Old Flagstone Floor During Restoration Ripley

Next task was to clean the flagstones. They were so dirty I decided to use Tile Doctor Remove and Go which is a stronger product to breakdown the ingrained dirt. Fortunately, I was able to use a standard black scrubbing pad attached to my rotary buffer to work the product into the stone. The dirt was removed with the wet vacuum cleaner as I progressed however the stone was so dirty that the soil ran back down into the grout. So, after cleaning the tiles I had to go over the grout again.

Once completed, the client was astonished at the difference. I used a lot of water in the cleaning process so the floor was left for three days so it would thoroughly dry out before I returned to apply the sealer.

Sealing a Flagstone Tiled Kitchen Floor

Returning on the Tuesday, first I checked the floor was dry with a moisture meter. My plan to leave the floor for three days had worked well and I confirmed the floor was dry and ready to be sealed.

To seal the floor, I applied three coats of Tile Doctor Seal and Go Extra with a paint pad and a soft brush. There was a lot to cover and each coat is left to dry before applying the next, so it took some time before I was done. Seal and Go Extra is a breathable sealer so it will allow moisture to rise through the floor this is an important consideration when sealing old floors which don’t have a damp-proof membrane. The sealer worked well on the stone really bringing out the colours, so the stones now looked like stones rather than black rocks.

400 Year Old Flagstone Floor After Restoration Ripley 400 Year Old Flagstone Floor After Restoration Ripley

The client was over the moon with the difference, they had literally never seen the floor looking like this. The children and dog were firmly told they would be wiping their feet before traipsing the garden through the house in future!

400 Year Old Flagstone Floor After Restoration Ripley

For aftercare I recommended they used Tile Doctor Neutral Tile Cleaner which will keep the floor clean and is not overly strong like many supermarket cleaning products which can prematurely erode the protection provided by the sealer.

 

Source: Flagstone Tile Cleaning, Sealing and Restoration Service in Ripley, Surrey

Deep Cleaning and Sealing Reclaimed Flagstones in Harrogate, North Yorkshire

This is a reclaimedYorkshire flagstone floor that was re-laid at a house in Harrogate some years prior with under floor heating. The Yorkshire stone was really nice and contained some varied natural colours including green from what must have been a copper deposit in the stone. This is the beauty of this type of stone, there is a huge variation in tone and colour. The client got in touch with Tile Doctor as the stone looking flat and featureless and had become difficult to keep clean.

Yorkshire stone flagstone floor before renovation Harrogate

It was clear to me that the original sealer had all but worn off leaving the floor vulnerable to dirt, there were also some paint splashes from decorating that needed removing and some old tar spots that must have been there some time. The lovely property was in a quiet road near the centre of Harrogate which is a popular tourist spot close to the picturesque Yorkshire Dales.

Yorkshire stone flagstone floor before renovation Harrogate

Cleaning a Yorkshire Flagstone Tiled Kitchen Floor

I gave the floor a thorough clean using a strong dilution of Tile Doctor Pro-Clean which was left to soak in for ten minutes before being scrubbed in with a black scrubbing pad fitted to a rotary machine. This process also softened the paint splashes and tar spots which I was able to carefully scrape off. The soiled cleaning solution was rinsed off the floor using water and then extracted with a wet vacuum.

Once the floor was clear it was then inspected, and stubborn areas re-treated using the same process until I was happy the floor was as clean as it could be and that any trace of old sealer had been removed. It’s important to ensure the floor is clear of old sealers before resealing as otherwise you end up with different layers of sealer on the floor. Also, if you don’t know what was applied previously you cannot guarantee that the new sealer will work with it, so it is best to start with a totally clean base.

Before leaving for the night I gave the floor a thorough rinse with water to remove any trace of cleaning product and then extracted as much moisture as possible with the wet vacuum. Additionally, I asked the owner of the property to leave the underfloor heating on overnight to aid the drying process. We cannot seal the floor if it is not completely dry.

Sealing a Yorkshire Flagstone Tiled Kitchen Floor

The customer wanted a matt finish so when I came back the next day to seal the floor, I used two coats of Tile Doctor Ultra Seal. This is a natural look sealer that protects the stone from within but without altering its appearance, this works well if you’re looking to keep the floor appearance as light as possible. The deep cleaning and fresh sealer transformed the stone giving it a subtle contrast that brought out the unique colours in the stone including the green of the copper.

Yorkshire stone flagstone floor after renovation Harrogate

The client was very satisfied with the overall finish of the floor, the natural beauty of the Yorkshire Flagstone had been restored and now they would be able to maintain the floor keeping it looking lovely for longer. I suggested they use the Tile Doctor Neutral Cleaner for ongoing maintenance. This is a nice natural product specifically formulated for this type of floor.

Yorkshire stone flagstone floor after renovation Harrogate

 

Source: Flagstone Tile Cleaning and Sealing Service in Harrogate, NorthWestYorkshire